Got a little more work done.
I started drawing the walls for the haunted house exterior. I've made 6 of 8 sheets so far and I put them together quickly to see how the seam between sheets would look. I originally thought I'd put some pillars in between the sheets, but since it seems OK without, I might just try to line the sheets up as is.
On the day, I'll have them all flat across the front. There won't be any angled pieces like you see in the pictures. Also, I'll have the trees to hide one of the seams. I will be making a doorway which will hide the center. So, I think I'll let the pillar idea go for now.
I also started work on the actual fence part of the fence
I bought some PVC pipes and black wire. I cut the pipes into 7 pieces (2x90cm, 3x80cm, 2x100cm.) Then using the black wire I tied the pipes together. Here's a shot of what it will potentially look like:
my pipes
How to make a PVC pipe rot iron fence: this has the full write up on what you need and what I did.
I made 4 sections. The arrangement is inherently unstable. I have to set this on the floor so, there's no staking it into the ground. To add some stability, I hot-glued all of the pieces as well. It's still rickety, but should hold up for a few pictures at least.
I'm still working on ideas for fence toppers. I have some small skulls that I'm going to try once I pull out all of my Halloween stuff. Another idea is some foam spear tips.